Absolutely the best compensated saddles made for the Telecaster! First of all, I made the Intone Cutting Edge saddles for me as a guitar player. I carefully thought out and designed what I truly believe will soon become the world's most popular saddles. They are designed so that the ends of the saddles touch. I chose to make them this way because it minimizes movement and helps with the overall sound. It took a lot of time, effort and looking at things in a new way to come up with this design. The E/A is even longer on the E string side, for more string clearance. The edges are designed to touch at the top and not at the bottom. This is a huge improvement. This new relief will allow you to follow the radius of your guitar neck without causing the saddles to separate. Precision machined from billet. State of the art CNC machining center. All three saddles line up perfectly, and are cut so that the edges line up straight. I offer solid Brass, Stainless Steel, Hardened Steel, Titanium, and Aluminum saddles. My goal is perfect intonation (within .1 Hz) on all six strings. The height adjustment screws are tilted back to keep them off the bridge-plate screws. They are also rounded on the bottom. I use a #4 height adjustment screw with a dome bottom for two reasons. They are not as wide as the traditional #6 screw, so you get more string clearance. The dome bottom insures that you get the best contact to your bridge-plate. Fillister head intonation screws, springs, and Allen head height adjustment screws are all stainless steel. Stainless steel hardware means that oil and sweat from your hands will not cause corrosion of the parts - leaving them easy to adjust for the life of the guitar. These saddles can be installed on any vintage style Tele bridge-plate with no modifications required. My Intone saddles come with directions, one Allen wrench, six dome bottom #4-40x3/8" height adjustment screws, two short dome bottom #4-40x5/16" screws, and are very easy to install and adjust.

"Wide Intone Twang" This set is for those who use a .052 /.038 or .050/.036 for E/A strings. The standard Intone saddles work great for your typical matched set of strings, that is, strings that are commonly paired together and sold in sets. When string gauges are used in less typical pairs (for example, an E/A pair of .052/.038), the standard Intone saddles will not produce the accurate (+/- .1Hz) intonation. Therefore, I have developed a saddle set with an alternate E/A saddle that I call “Wide Intone” for E/A string pairs that are widely different.

Brass has a very nice balanced tone. Aluminum adds highs and cuts out mids without losing the low end. Stainless Steel  adds a nice mid tone more pronounced than brass. ( funky Jerry Reed tone) Heat Treated Steel also adds a nice mid tone like the stainless but a little warmer. ( Bakersfield Roy Nichols and Don Rich tone) Titanium is a very light weight and hard material you might think it would sound similar to Aluminum, but the sound is much more similar to Brass and also adds a little sparkle to the high end.