Yesterday Sounds Better Today!
The "Intone Cutting Edge" Compensated Saddles ®
The saddles are designed so that the ends of the saddles touch, it minimizes movement and helps with the overall sound. The E/A is longer on the E string side, for more string clearance. The edges are designed to touch at the top and not at the bottom. This relief will allow you to follow the radius of your guitar neck without causing the saddles to separate. Precision machined from billet. State of the art CNC machining center. All three saddles line up perfectly, and are cut so that the edges line up straight. Offered in solid Brass, Cold Rolled Steel, Titanium, and Aluminum. They should intunate (within .1 Hz) on all six strings. The height adjustment screws are tilted back to keep them off the bridge-plate screws, they also have rounded dome bottoms for more contact with the bridge-plate. The height adjustment screws are a #4 they are not as wide as the traditional #6 screw, so you get more string clearance. Fillister head intonation screws, springs, and Allen head height adjustment screws are all stainless steel. The "Intone cutting edge" saddles come with directions, one Allen wrench, three springs, six dome bottom #4-40x3/8" height adjustment screws, two short dome bottom screws #4-40x5/16" and three intonation screws.
|FREE SHIPPING USA|
|25.00 INTERNATIONAL SHIPPING Click the shipping once, you can buy multiple items.|
|price $57.99 The "Brass" Intone Cutting Edge set /three brass/|
|price $57.99 The "Twang" Intone Cutting Edge set /aluminum E/A, brass D/G & B/E / this is the set that Billy Gibbons & Redd Volkaert use.|
|price $67.99 The "Twang Plus" Intone Cutting Edge set /aluminum E/A plus a brass E/A, brass D/G & B/E/|
|price $57.99 The "Bakersfield Twang" Intone Cutting Edge set 1/4" /aluminum E/A, cold rolled steel D/G & B/E /|
|price $59.99 The "Wide Twang" Intone Cutting Edge set /aluminum E/A, brass D/G & B/E/ for heavy gauge E&A strings E 052 / A 038, E 050/ A 036 or heavier.|
|price $59.99 The "Wide Brass" Intone Cutting Edge set /three brass/ for heavy gauge E&A strings E 052 / A 038, E 050/ A036 or heavier.|
|out of stock price $57.99 The "Left Hand Brass" Cutting Edge set /three brass/|
|out of stock price $57.99 The "Left Hand Twang" Intone Cutting Edge set /aluminum E/A, brass D/G & B/E/|
|price $99.99 The "Titanium" Intone Cutting Edge set /three titanium/|
|price $67.99 The "Groovy 60s" Intone Cutting Edge threaded compensated saddles set 1/4" cold rolled steel un-plated.|
|price $57.99 The "High O' Mighty" Intone Cutting Edge set /three aluminum/ the twang factor just doubled this is the brightest set/ put your guitar in HIGH-GEAR!|
|price 67.99 The "Intone Cutting Edge" Spanish Electric set /three cold rolled steel/ The Glendale "Intone Cutting Edge" Spanish Electric saddle set is made from 5/16" cold rolled steel. Slightly aged for a vintage look.|
|price $57.99 The "Screamin'59's" Intone Cutting Edge set /three cold rolled steel 1/4" un-plated/|
|price $57.99 The "Brass" Intone Cutting Edge set /three brass 1/4"|
|price 21.99 One Intone Cutting Edge E/A /aluminum saddle 5/16 " You can substitute for the "Wide Intone" E/A aluminum or brass/ You can also substitute for the E/A, D/G, & B/E in brass/ Please write a note for any substitutions at checkout price.|
Different saddle material will give your guitar different tones
Brass has a very nice balanced tone of highs mids and lows. Aluminum adds highs without losing mids or lows. Cold rolled steel adds a very acoustical value to your guitars tone, more highs than brass but less highs than aluminum. Titanium is a very light weight and hard material the sound is similar to brass but adds a little sparkle to the highs.
|Made in the USA|
|2004-2020 Glendale Guitars all rights reserved Copyright ©|